SAMBA 設定

1. Create a new section at the bottom of the file, or uncomment one of the examples, for the directory to be shared:
   

   [share]
       comment = Ubuntu File Server Share
       path = /srv/samba/share
       browsable = yes
       guest ok = yes
       read only = no
       create mask = 0755

   • comment: a short description of the share. Adjust to fit your needs.
     
   • path: the path to the directory to share.
     This example uses /srv/samba/sharename because, according to the Filesystem Hierarchy Standard (FHS), /srv is where site-specific data should be served. Technically Samba shares can be placed anywhere on the filesystem as long as the permissions are correct, but adhering to standards is recommended.
     
   • browsable: enables Windows clients to browse the shared directory using Windows Explorer.
     
   • guest ok: allows clients to connect to the share without supplying a password.
     
   • read only: determines if the share is read only or if write privileges are granted. Write privileges are allowed only when the value is no, as is seen in this example. If the value is yes, then access to the share is read only.
     
   • create mask: determines the permissions new files will have when created.
     
2. Now that Samba is configured, the directory needs to be created and the permissions changed. From a terminal enter:
   

   sudo mkdir -p /srv/samba/share
   sudo chown nobody.nogroup /srv/samba/share/

   	The -p switch tells mkdir to create the entire directory tree if it doesn't exist. Change the share name to fit your environment.

3. Finally, restart the samba services to enable the new configuration:
   

   sudo /etc/init.d/samba restart 

   or 

   sudo /etc/init.d/smbd restart 

   Ref: https://help.ubuntu.com/9.10/serverguide/C/samba-fileserver.html